PM Pedestal Mount

This small highly versatile mount can be used as a conventional compression mount for loads between 5 and 60Kg per mount depending on the rubber hardness selected.  It can also be used as a fail-safe suspension mount by suspending a load from below and using a suitable washer and lock-nut above.

Materials.

All metal parts are Sherardised steel.  Various rubber materials are available although the standard production ranges from 35 to 70ShA in natural rubber (NR)   Alternative materials can also be provided bu these may be subject to a minimum quantity.

Applications

Typical applications include small pumps, motors and fans.

Installation

This mount is intended to be secured to the isolated equipment via the M8 thread and to a firm base via the 2 x 6mm holes (although this can be reversed if more convenient.  This mount is intended for use in compression.  The mount can also be installed such that a suspended load acts to compress the mount.

Load/Deflection Curves

From the graphs it can be seen that loads between 5 and 60Kg can be supported by these mounts.  For isolation purposes, a deflection of 2 – 3mm should be targeted.