Product information download

This mount, intended to operate in shear is available to cover a wide range of loads between 10 and 60Kg by selecting the appropriate rubber hardness. High levels of isolation are possible by virtue of the relatively high deflections provided. This mount has soft and harder axes

Typical applications: Vibratory equipment, pumps, motors etc.

This mount must be fixed at both ends and can be used in any orientation except tension. A high degree of resilence is provided.

As shown in the diagram below the mounting feet are parallel but the mount can also be twisted should this be required.

Available as standard in any of our natural rubbers from 35 to 70ShA. However, this part can also be produced in Nitrile, Neoprene and EPDM materials. Standard version is in AISI 316 stainless steel although a mild steel version would also be possible.

Load/Deflection Graph

The graph shows deflection in the vertical direction for each of the standard rubber hardnesses.

The normal maximum deflection is 12mm in this direction giving loads up to 60Kg.  Minimum loading for the softest version would be 5Kg 


Have an enquiry?